Intelligence artificielle: un nouveau logiciel fait beaucoup parler de lui
Maintenant, pour s'inscrire, il lui faut une adresse email et un numéro de tel
A croire que c'est payant ce truc ?
Sinon en lui posant des questions ;-)
what is the difference between ipv6 ans ipv4 ?
IPv4 and IPv6 are two different versions of the Internet Protocol (IP) that are used to identify devices on a network and to locate them on the internet.
IPv4 is the fourth version of the IP protocol, which is the most widely used version on the internet today. It uses a 32-bit address scheme, which allows for a total of 2^32 unique addresses, or approximately 4.3 billion unique addresses.
IPv6 is the sixth version of the IP protocol and was developed to address the growing shortage of available IPv4 addresses. It uses a 128-bit address scheme, which allows for 2^128 unique addresses, or approximately 3.4 x 10^38 unique addresses. This is a much larger number of unique addresses than IPv4, and it should be sufficient to meet the needs of the internet for the foreseeable future.
Some other differences between IPv4 and IPv6 include:
IPv4 addresses are represented in a dotted decimal notation (e.g., 192.0.2.1), while IPv6 addresses are represented in a hexadecimal notation (e.g., 2001
85a3:0000:0000:8a2e
7334).
IPv6 has a more efficient routing system than IPv4.
IPv6 supports more features than IPv4, such as automatic address configuration and support for new protocols.
ou bien
Why in belgium is there a lot of dynamics ip's and less static ip's or ipv6 ?
It is not uncommon for internet service providers (ISPs) to assign dynamic IP addresses to their customers rather than static IP addresses. A dynamic IP address is an address that is assigned to a device temporarily and can change over time, while a static IP address is a permanent address that is assigned to a device and does not change.
There are a few reasons why ISPs might choose to assign dynamic IP addresses rather than static IP addresses:
Dynamic IP addresses are more cost-effective for the ISP. It is generally cheaper for the ISP to assign dynamic IP addresses than static IP addresses, as they do not have to reserve a specific address for a specific customer.
Dynamic IP addresses are more efficient for the ISP. With a dynamic IP address system, the ISP can reuse IP addresses when a customer disconnects from the network, which helps to conserve addresses and reduce waste.
Dynamic IP addresses can provide better security. With a dynamic IP address, it is more difficult for hackers to target a specific device, as the device's IP address may change over time.
As for the adoption of IPv6 in Belgium, it is possible that there are fewer static IPv6 addresses in use compared to dynamic IPv4 addresses because IPv6 is a relatively new protocol and it is still in the process of being adopted. It is also possible that there are other factors at play, such as the availability of IPv6 addresses from the ISP or the cost of transitioning to the new protocol.
ou encore :
Est-ce que tu parles francais ou wallon ?
Je suis un programme informatique et je ne parle pas de manière native. Cependant, j'ai été conçu pour comprendre et répondre à de nombreuses langues, y compris le français et le wallon. Si vous avez des questions ou des demandes d'informations en français ou en wallon, n'hésitez pas à me les poser. Je ferai de mon mieux pour vous aider.
Encore mieux :
eins zwei polizei
"Eins zwei Polizei" is a phrase in German that means "one two police." It is a counting rhyme that is often used by children when playing games. It is similar to the English counting rhyme "One, two, buckle my shoe."
Moi qui pensait qu'il allait commencer à chanter :
Eins Zwei Polizei
Ajouté après : 11 minutes 3 secondes:
Autrement, demandez-lui un fichier de config netplan pour l'ipv4 et l'ipv6 :
donnes moi le fichier netplan pour une ipv4 en classe C et une ipv6 routable
Voici un exemple de fichier de configuration Netplan pour une configuration IPv4 en classe C et une adresse IPv6 routable :
code : Tout sélectionner
network:
version: 2
renderer: networkd
ethernets:
eth0:
dhcp4: no
addresses: [192.0.2.2/24]
gateway4: 192.0.2.1
nameservers:
addresses: [8.8.8.8, 8.8.4.4]
dhcp6: no
addresses: [2001:db8:0:1::2/64]
gateway6: 2001:db8:0:1::1
Ce fichier de configuration configure l'interface réseau eth0 avec une adresse IPv4 en classe C (192.0.2.2) et une adresse IPv6 routable (2001:db8:0:1::2). La passerelle par défaut pour l'IPv4 est définie sur 192.0.2.1 et la passerelle par défaut pour l'IPv6 est définie sur 2001:db8:0:1::1.
Veuillez noter que cet exemple de fichier de configuration est fourni à titre indicatif uniquement et qu'il peut être nécessaire de l'adapter en fonction de votre configuration réseau spécifique.
Castard quand même ! :eek:
Flex+ Mega Fiber FTTH 500 DL/500 UP avec Internet Box + TV Box V7c 
85a3:0000:0000:8a2e
7334).
2:
